You are here:Home >> Products >> Fiber NIC Card >> 40GBASE NIC Car...

Products

Products

Contact us

Tel: +86-755-3396 7196
Fax: +86-755 3396 7196
E-mail: [email protected]
Add: 1803C, Block AB, Bldg#1, HengMing Bay Exchange Center,
HuiLongPu, LongGang District, Shenzhen, 518172, China

40GBASE NIC Card

S9902BF-2QSFP+

Dual QSFP+ Port Fiber 40 Gigabit Ethernet PCI Express Server Adapter (Intel XL710AM2 Based)

This Dual QSFP+ Fiber 40 Gigabit Ethernet PCI Express server adapter is designed for Servers and high-end appliances. This card offer simple integration into any PCI Express X8 to 40Gigabit Networks. The performance is optimized so that system I/O is not the bottleneck in high-performance networking applications.
The 40G Dual QSFP+ port Server Adapter  is based on Intel XL710AM2 Ethernet controller with two fully integrated Gigabit Ethernet Media Access Control (MAC) and XLPPI Interface. In addition to managing MAC and PHY Ethernet layer functions, the controller manages PCI Express packet traffic across its transaction, link, and physical/logical layers. Using hardware acceleration, the controller offloads tasks from the host, such as TCP/UDP/IP checksum calculations and TCP segmentation.
This card is the ideal solution for implementing multiple network segments, mission-critical high-powered networking applications and environments within high performance servers.
  • l Support for jumbo frame up to 9.5KB

    l Flow control support

    l Priority Flow Control (draft IEEE 802.1Qbb)

    l Enhanced Transmission Selection (draft IEEE802.1az)

    l Statistics management and RMON

    l 802.1q VLAN support

    l DCB/DCB-X support

    l Message Signal interrupts (MSI-X)

    l Storage - Enabling competitive performance with native OS intelligent offload solutions, including NAS, iSCSI and FcoE

    l Support PCI Express Base Specification 3.0 (8GT/sec)

  • l Data rate supported per port: 40G

    l Bus type: PCI-Express Base Specification Revision 3.0 (8 GT/sec)

    l Bus width: X8 Lane

    l Connector: QSFP+ Port

    l Interrupt levels: MSI-X

    l Controller: Intel XL710AM2

    l Holder: Metal Bracket

    l Power consumption (typical): 2.880 W

    l PCI Express Voltage: +12V +- 8%

    l Storage temperature: -40°C–65°C (-40°F–149°F)

    l Operating temperature: 0°C – 45°C (32°F –  113°F)

    l Operating humidity: 0%–90%, non-condensing

    l Operating system support: Windows, Linux

  • l Windows

    l Linux

  • Please submit your basic information and we will reply you as soon as possible! 

    *

    *

    *

    *

Related products